– Use the carpet sweeper to remove small bits of debris from the carpet or rugs..

Three screws need to be removed before you can take out the V11’s battery.Here’s where to find them:.

The first is on the rear of the vacuum body (almost directly behind the red trigger)..The other two screws are located on the bottom of the battery.You’ll need to tilt the vacuum onto its side to access them.. It’s worth noting that the bottom screws are meant to be at an angle.

Keep this in mind when removing and replacing the screws.. Be very careful to use the right screwdriver when removing the battery.Using the wrong screwdriver risks stripping the screw heads, which makes the battery very difficult to remove without specialist tools.

We recommend using a Phillips screwdriver, but make sure you check the size.. Once the three screws have been removed, you should be able to slide the battery out of its housing in the vacuum’s handle..

Ensure that you dispose of the battery correctly.For more information, read our guide to the.

various types of mop.Choose the Right Hardwood Vacuum Cleaner.

Vacuums with stiff rotating bristles can damage hardwood floors, so you need to use a cleaner that won’t cause scratches..If your vac has a rotating brush roll, check to see if you can switch it off.