These can be effective, but the DIY solution above can still work in many situations – plus most people already have white vinegar and washing up liquid in their house.. What Should You Do If The Stain Remains Visible?.

The entrance inlet to the floorhead.All dirt and other debris must pass through here, so it’s a common location for a blockage.

You may need to remove the baseplate using a coin to properly check for a blockage..Inside the attachments, such as the crevice tool or dusting brush.. Also check the brushroll for any tangles or other issues that might stop it from turning freely.If the brushroll can’t spin, the Dyson may switch off as it detects an error.. To give you an example of the issues a blockage can cause, one of our test vacuums (a Dyson V7 Animal) started pulsing during use.. After checking the vacuum’s filters, we realised that there was a blockage at the entrance to the floorhead behind the brush roll.

Taking off the base plate and clearing the blockage instantly solved the issue.. Summary.Dyson produces some excellent cordless vacuum cleaners, but they can occasionally suffer from faults and other issues.. Pulsing is one of the most common.

It’s a frustrating problem, as the vacuum seems to work but is unable to provide a continuous stream of suction.. Fortunately, pulsing can usually be fixed by clearing any blockages, cleaning the filters, and making sure that the vacuum is fully charged.

You may also need to replace the battery if it’s getting towards the end of its life..Rugs collect a huge amount of dirt, so it’s necessary to give them a thorough cleaning on a regular basis.

Take area rugs outside to beat the dust out of them with a sturdy stick before vacuuming..Do you have a shag rug?

These are dust magnets, so.make sure to read our guide to cleaning shag rugs.