It adds a natural shine to your vinyl floors..

Coin to unlock the brush bar.Do not use water, a wet cloth, or any cleaning products for the process below..

Step 1: Remove The Floorhead.Before you start trying to clean the Vax Blade 4 brush bar, it’s best to remove the floorhead from the machine.You can do this by pressing the blue button at the bottom of the wand..

There are two reasons for this:.It’s much easier to work with the floorhead when it’s not attached to the main vacuum..

Removing the floorhead means there’s no chance of accidentally switching the vacuum on while cleaning the brush, which could cause injury..

Step 2: Remove The Brush Bar.Hold the Gtech Multi Mk2’s dust bin over the outdoor bin, then pull down the latch to open the trap door.

Dirt and other debris will fall out of the bin automatically, although you may need to give it a tap to get rid of any remaining material..Unfortunately, the Gtech Multi Mk2’s dust bin doesn’t have an internal collar to push out stuck clumps of hair and debris.

You’ll need to pull these out by hand, although you can reduce the chance of them developing by avoiding overfilling the bin..Step 4: Re-attach The Gtech Bin.